top of page
HVI PTS 130(F) - 130kV DC Hi-pot

HVI PTS 130(F) - 130kV DC Hi-pot

SKU: 1001

The PTS-130F combines the functionalities of a high voltage DC proof tester and a megohmmeter into a single device, streamlining the processes of dielectric strength and insulation resistance testing. This integration leads to time, size, and weight savings. It is equipped with a 5-range current meter that is calibrated from 0 – 1 dc microamps, ensuring precise current measurement down to a resolution of 10 nanoamps in the x1 range. By utilizing the alternate scale on the current meter, the PTS Series can effectively serve as a Megohmmeter, capable of measuring insulation resistance up to 13 teraohms, with the scale ranging from 100 megohms to 1 megohm at any applied voltage.

Notable features encompass a 20-foot (6-meter) shielded output cable, ground and return leads, a 5-range current/megohm meter for accurate leakage current measurement, the ability to read Megohm values at any output voltage up to 13 teraohms, a Full-wave bridge rectifier, an internal HV Shorting Solenoid with discharge resistors, and automatic transit-protected meters with an anti-static glass face.

 

Specifications:

  • Input: 230 V, 50/60 Hz, 8 A
  • Output:    0 – 130 kV DC @ 10 mA, negative polarity, positive ground Full Wave Bridge Rectification
  • Duty: Continuous, capacitive charging
  • Voltmeter: 3.5”, scaled 0 – 75/150 kV DC, ±2% F.S.
  • Current Meter: 3.5”, scaled 0 – 1.0 μAdc, ±2% F.S. with multipliers of x 1, x 10, x 100, x 1 k, x 10 k. Guard/ground load return
  • Megohmmeter: Scaled 100 -1 MΩ ±2% F.S. with multipliers of x 0.1, x 1, x 10, x 100, x 1 k
  • Output Termination: 20 ft. (6m) shielded EPR output cable with alligator clamp EPR cable stays flexible in cold weather


To inquire about Electrical Test Equipment rental, kindly reach out to Skysun Energy via email at support@skysunenergy.com or by phone at +973 3312 1984 or +971 5257 97530.

bottom of page