top of page
Fluke 6500-2 Portable Appliance Tester

Fluke 6500-2 Portable Appliance Tester

The Fluke 6500-2 PAT tester is a low weight, small size, one-touch solution with redesigned auto-test capabilities to help you increase the number of portable appliance tests completed each day.  The 6500-2 is designed to enable you to work faster without compromising test results.

  • Dedicated key for each test for ‘one-touch’ testing
  • Pre-set pass/fail levels to save time
  • Single mains socket for appliance connection
  • Separate IEC socket for easy mains/extension lead testing
  • USB port for data transfer
  • Integral QWERTY keyboard for rapid data entry
  • Additional USB memory capability for back-up data storage and transfer to PC
  • Pre-set, auto-test sequences for user convenience
  • Integral site, location and description codes for faster data processing
  • Memory review facility for more on-site control
  • USB port for data transfer
  • Safety Rating:  CAT II 300V
  • Complies with EN61010-1 3rd edition
  • IP Rating:  IP40 (enclosure) IP20 (connectors)
  • Tech specs

    Specifications: Fluke 6500-2 Portable Appliance Tester

    Test specifications
    • The accuracy specification for the display range is defined as ±(%reading + digit counts) at 23 °C ±5 °C, ≤75% RH.
    • Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may degrade by 0.1 x (accuracy specification) per °C.
    • The measurement range meets the service operating errors specified in EN61557-1: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2
    Power-on test

    The test indicates reversed L-N, missing PE, and measures the mains voltage and frequency.

    • Display range    90 V to 264 V
    • Accuracy at 50 Hz    ±(2% + 3 counts)
    • Resolution     0.1 V
    • Input impedance          > 1 MΩ // 2.2 nF
    • Maximum input mains voltage    264 V
    Earth bond test (Rpe)
    • Display Range    0 to 19.99 Ω
    • Accuracy    ±(5% + 2 counts) from 0.1 to 300 MΩ
    • Resolution    0.01 MΩ (0 to 19.99 MΩ), 0.1 MΩ (20 to 199.9 MΩ), 1 MΩ (200 to 299 MΩ
    • Test voltage    500 V DC -0% + 25% at 500 kΩ load or 250 V dc -0% +25% at 250 kΩ load
    • Test current    > 1 mA at 500 kΩ load, < 15 mA at 0 Ω
    • Auto discharge time    < 0.5 s for 1 μF
    • Max. capacitive load    Operational up to 1 μF
    Touch current test
    • Display range    0 to 1.99 mA AC
    • Accuracy    ±(4% + 2 counts)
    • Resolution    0.01 mA
    • Internal resistance (via probe)    2 kΩ
    • Measuring method    Probe*
    Substitute leakage current test
    • Display range    0 to 19.99 mA AC
    • Accuracy    ±(2.5% + 3 counts)
    • Resolution    0.01 mA
    • Test Voltage    100 V AC ±20%
    Load/leakage test: load current
    • Display range    0 A to 13 A
    • Accuracy    ±(4% + 2 counts)
    • Resolution    0.1 A*
    Load/leakage test: load power
    • Display range 230 V Mains    0.0 VA to 3.2 kVA
    • Accuracy     ±(5% + 3 counts)
    • Resolution    1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)*
    •  
    Load/leakage test: leakage current
    • Display range    0 to 19.99 mA
    • Accuracy    ±(4% + 4 counts)
    • Resolution    0.01 mA*
    PELV test
    • Accuracy at 50 Hz    ±(2% + 3 counts)
    • Overload protection    300 V rms
    • Warning threshold    25 V rms
    RCD test: trip current
    • Operational error    ±10%
    • Nominal    30 mA
    • Accuracy    ±5%
    RCD test: trip time
    • Standard requirement    61557 Part 6; tolerance of rated test current 0% to +10%
    • Operational error    ±10%
    • RCD type    AC general-purpose 30 mA
    • Display range    310 ms
    • Resolution    0.1 ms
    • Accuracy    3 ms
    • Trip time limit at 100% (30 mA)    300 ms
    • Trip time limit at 500% (150 mA)    40 ms

     

     

  • DATA SHEET

bottom of page